How to Install a Water Purifier?

Water purifier installation involves correctly connecting the main components of the device (filters, membrane, storage tank, faucet) to each other and to the plumbing system. This process is crucial for the efficient and safe operation of the device. Incorrect installation can lead to water leakage, low performance, or the device not functioning at all.

Therefore, it is highly recommended that the installation be carried out by an experienced team or professional service. Especially after selecting the right water purification system, completing the installation with expert support ensures long-term use.

What Are the Components of a Water Purifier?

Water purifier components consist of several parts, each playing a critical role in the efficient operation of the device. The main components are:

• Filter Housings
• Filters
• Membrane Housing
• Storage Tank
• Purified Water Faucet
• Pump (Optional)
• Hoses and Connection Fittings
• Electronic Board and Sensors (Optional)

How to Install a Water Purifier Filter?

• Turn off the water and release the system pressure.
• Open the filter housing using a special wrench.
• Remove the old filter and clean the inside of the housing.
• Remove the protective caps from the new filter.
• Insert the new filter into the housing in the correct direction (usually arrows pointing downward) and ensure it fits snugly.
• Check the O-ring seal on the housing cap and close it tightly.
• Turn on the water, check for leaks, and discard the initial water output.

How to Install the Membrane Filter?

• Turn off the water and release the pressure.
• Open the membrane housing caps.
• Remove the old membrane and take off the protective covers from the new one.
• Insert the membrane into the housing in the correct direction (usually the O-ring end faces downward/toward the outlet), pushing it gently without bending.
• Check the O-rings on the caps and close them tightly.
• Connect the waste and clean water hoses to the correct ports (they are labeled).
• Turn on the water, check for leaks, and discard the first 2–3 **tanks** of water to flush the membrane.

How to Connect the Hoses of a Water Purifier?

The hoses of water purifiers are connected using quick-connect fittings:

• Pull back the plastic collar on the end of the hose.
• Push the hose into the fitting until it fits snugly.
• Push the plastic collar forward to lock it in place.
• Pull the hose slightly to make sure it is secure.
• Ensure the connections are made to the correct ports (Inlet, Outlet, Waste, Tank).

Does Countertop Get Damaged During Installation?

The countertop is not damaged during installation because the faucet hole is drilled with a special diamond-tipped drill in a precise manner. When done by professional teams, there is no risk of cracks or breakage on the surface. This method can be applied to granite, marble, ceramic, and composite countertops.

How to Choose the Right Water Purifier?

To find the right water purifier, you should first measure the TDS level of your tap water. This analysis helps determine which filtration system you need. Then, choose the device type based on the number of people in the household, daily water consumption, and your expectations.

By exploring reliable brands like Sulax and receiving technical support, you can make a more informed decision. Always purchase from authorized sellers offering genuine products, long warranties, and a wide service network. These steps will help you acquire a safe and long-lasting water purification system.